How often should my pool be cleaned in Peoria?

For optimal water quality in Peoria, AZ, we recommend weekly pool cleaning. Our weekly service includes skimming, brushing, vacuuming, and chemical balancing to keep your pool pristine year-round.

Do you repair pool pumps and heaters?

Yes, we handle all pool equipment repairs. Whether your pump is making noise or your heater won't turn on, our experienced technicians can diagnose and fix the issue promptly.

What is included in a green to clean service?

Our green to clean service transforms algae-filled pools back to crystal clear. It includes chemical treatments, heavy brushing, vacuuming, and filter cleaning until the water is safe and balanced.

How much does pool cleaning service cost?

Every pool is different, so we provide a free written quote after seeing your situation. There is no pressure, and we tailor our maintenance plans to fit your specific needs.

Do you send reports after cleaning?

Absolutely. We are proud to provide a detailed report with photos after every single service visit, so you always know exactly what was done.

Are you locally owned and insured?

Yes, Preserve Pool Service is locally owned, operated, fully licensed, and insured. We treat every pool in our community as if it were our own.

Pool Light Repair in Peoria, AZ

Restore the beauty and safety of your pool at night. We fix broken fixtures, replace burnt-out bulbs, and upgrade old lights to brilliant, energy-efficient LEDs.

Get A Free Estimate Call (928) 500-8334

Pool Light Repair Services in Peoria

Bulb Replacement

We safely remove the fixture from the wall, replace the burnt-out incandescent or halogen bulb, and install a new lens gasket to ensure a watertight seal.

LED Color Upgrades

Upgrade your old lighting to modern, color-changing LED fixtures. LEDs use less electricity, last significantly longer, and transform the look of your pool.

Gasket & Seal Repair

If water is getting inside the light housing, the lens gasket has failed. We dry out the fixture and replace the gasket to prevent shorts and breaker trips.

Electrical Diagnostics

If your light won't turn on but the bulb is good, we diagnose the electrical run. We check GFCI breakers, junction boxes, and automation relays for faults.

Complete Fixture Replacement

If the housing is corroded or the power cord is damaged, the entire fixture must be replaced. We pull a new cord through the conduit and install a fresh unit.

Spa Light Repair

Spa lights are smaller but suffer from the same issues as pool lights. We repair and replace spa light fixtures, ensuring they are safe for hot water environments.

Brands/Materials We Work With

We service, repair, and install all major pool lighting brands, including Pentair (IntelliBrite, GloBrite), Hayward (ColorLogic), and Jandy (WaterColors). We ensure the new lights are fully compatible with your existing automation system.

Safety is paramount when electricity meets water. We use only OEM replacement gaskets and high-quality, UL-listed LED fixtures. We never compromise on safety by reusing old, compressed gaskets or using cheap aftermarket bulbs that can overheat the housing.

How a Pool Light Repair Works

Safety Disconnect

Before touching the water, we turn off all power to the lighting circuit at the main breaker and verify that no electricity is flowing to the fixture.

Fixture Removal

We remove the single screw holding the light in the wall niche and pull the fixture up onto the pool deck using the coiled extra cord.

Repair and Reseal

We open the housing, dry the interior, replace the bulb, and install a brand new rubber gasket. We then securely tighten the clamp ring to ensure a watertight seal.

Submersion and Testing

We submerge the fixture to check for air bubbles (which would indicate a leak). Once confirmed watertight, we reinstall it in the niche and restore power to test the light.

Warning Signs You Need Pool Light Repair

Water Inside the LensIf you can see condensation or a waterline inside the glass lens, the gasket has failed. Turn off the breaker immediately to prevent a short circuit.
Breaker Keeps TrippingIf the GFCI breaker trips every time you try to turn on the pool light, there is an electrical short, usually caused by water intrusion in the fixture or junction box.
Light is FlickeringA flickering light can indicate a failing bulb, a loose wire connection, or a failing transformer (if it's a low-voltage LED system).
Floating FixtureIf the light fixture has detached from the wall and is floating in the pool, the securing screw or the niche tab has broken. It needs to be re-secured safely.

Repair vs Replace

If your light fixture is in good condition and the interior is dry, a simple bulb and gasket replacement is a quick, cost-effective repair. We always replace the gasket when changing a bulb to guarantee safety.

However, if the metal housing is heavily corroded, the power cord has degraded, or water has severely damaged the internal socket, the entire fixture must be replaced. In these cases, we strongly recommend upgrading to a modern LED fixture. We provide a free written quote so you can choose the best option for your pool.

Is Your Pool Dark at Night?

Let our professionals safely repair your pool lighting today.

Get A Free Estimate

Neighborhoods We Serve in Peoria

From the vibrant LED setups in Blackstone at Vistancia to the traditional lighting in Fletcher Heights, we ensure Peoria's pools are safe and beautiful for night swimming.

Vistancia

Blackstone at Vistancia

Westwing Mountain

Trilogy at Vistancia

Sonoran Mountain Ranch

Tierra Del Rio

Pleasant Valley

Fletcher Heights

Silver Crest

Melton Ranch

Pool Light Repair FAQ

Can you change a pool light without draining the pool?

Yes. Most pool light fixtures are designed with enough extra cord coiled behind the niche to allow the fixture to be pulled up to the pool deck for bulb replacement and repair.

Why is there water inside my pool light fixture?

Water inside the fixture means the lens gasket has failed. This is dangerous and will cause the bulb to burn out and the breaker to trip. The gasket must be replaced immediately.

Do you upgrade old halogen lights to LED?

Yes, we highly recommend upgrading to LED pool lights. They use a fraction of the electricity, last much longer, and offer vibrant color-changing options.

Why does my pool light keep tripping the breaker?

A tripping breaker usually indicates water has entered the light fixture, causing a short circuit. It can also be caused by a faulty GFCI breaker or a damaged power cord.

How long does an LED pool light last?

Quality LED pool lights can last up to 30,000 hours, significantly outlasting traditional incandescent or halogen bulbs, which typically burn out after a few thousand hours.

Is it safe to swim if the pool light is broken?

If the glass lens is broken or you suspect water is in the fixture, do not swim. Turn off the breaker to the light immediately and call a professional for repair.