How often should my pool be cleaned in Peoria?

For optimal water quality in Peoria, AZ, we recommend weekly pool cleaning. Our weekly service includes skimming, brushing, vacuuming, and chemical balancing to keep your pool pristine year-round.

Do you repair pool pumps and heaters?

Yes, we handle all pool equipment repairs. Whether your pump is making noise or your heater won't turn on, our experienced technicians can diagnose and fix the issue promptly.

What is included in a green to clean service?

Our green to clean service transforms algae-filled pools back to crystal clear. It includes chemical treatments, heavy brushing, vacuuming, and filter cleaning until the water is safe and balanced.

How much does pool cleaning service cost?

Every pool is different, so we provide a free written quote after seeing your situation. There is no pressure, and we tailor our maintenance plans to fit your specific needs.

Do you send reports after cleaning?

Absolutely. We are proud to provide a detailed report with photos after every single service visit, so you always know exactly what was done.

Are you locally owned and insured?

Yes, Preserve Pool Service is locally owned, operated, fully licensed, and insured. We treat every pool in our community as if it were our own.

Pool Equipment Repair in Peoria, AZ

Fast, reliable repairs for all your pool system components. Our expert technicians diagnose and fix pumps, heaters, filters, and automation systems to get your pool running smoothly again.

Get A Free Estimate Call (928) 500-8334

Technician repairing pool equipment in Peoria AZ

Pool Equipment Repair Services in Peoria

Pump & Motor Repair

We diagnose noisy bearings, leaking seals, and electrical failures. Getting your pump running efficiently is crucial for water circulation.

Heater Troubleshooting

From ignition problems to error codes on both gas heaters and electric heat pumps, we restore your ability to control the water temperature.

Filter System Fixes

We repair cracked filter housings, replace broken laterals, and fix multi-port valve leaks on sand, cartridge, and DE filter systems.

Salt Cell Repair

If your salt chlorinator is showing low salt errors or failing to produce chlorine, we can clean, test, and repair the control board or cell.

Plumbing & Leak Repair

We locate and fix leaks at equipment pads, replace cracked PVC pipes, and install new valves to ensure your system is water-tight.

Automation System Repair

We resolve connectivity issues and programming errors on modern pool automation systems, so you can control your pool from your phone again.

Brands We Work With

Modern pool equipment requires specialized knowledge. Our technicians are highly trained to diagnose and repair systems from the industry's leading manufacturers, including Pentair, Hayward, and Jandy. We understand the specific error codes and common failure points of these major brands.

When a replacement part is needed, we source high-quality, OEM (Original Equipment Manufacturer) components whenever possible. Using the right parts ensures your repair lasts longer and keeps your equipment warranty intact.

Pool equipment pad showing pump and filter

How a Pool Equipment Repair Visit Works

Thorough Diagnostics

We do not guess. Our technician inspects the malfunctioning equipment, tests electrical components with a multimeter, and checks for plumbing issues to pinpoint the exact cause of the failure.

Clear Written Quote

Once we diagnose the issue, we provide a transparent, written quote detailing the necessary parts and labor. We explain the problem clearly and wait for your approval before starting any work.

Professional Repair

With your approval, we complete the repair using high-quality parts. We ensure all connections are secure, electrical wiring is safe, and the equipment is reassembled correctly.

System Verification

Before we leave, we turn the system back on and verify that the repaired equipment is functioning perfectly and that there are no leaks at the equipment pad.

Warning Signs You Need Pool Equipment Repair

Loud or Screeching Pump NoisesIf your pump sounds like it is grinding rocks or screeching loudly, the motor bearings are likely failing and need immediate attention before the motor burns out completely.
Puddles at the Equipment PadWater pooling around your pump, filter, or heater indicates a broken seal or cracked plumbing. Small leaks can quickly turn into major, expensive failures if ignored.
Heater Will Not IgniteIf your heater clicks but fails to fire up, or turns on and immediately shuts off, you may have a faulty sensor, a bad thermal regulator, or a gas supply issue.
Poor Water CirculationIf the water flow returning to your pool is weak, you could have a clogged impeller, a dirty filter, or a suction-side air leak that needs to be diagnosed.

Repair vs. Replace: Making the Right Choice

When pool equipment fails, homeowners often wonder if it is better to fix the broken component or replace the entire unit. We provide honest assessments based on the age of your equipment, the cost of the parts, and the overall condition of your system. We will never push you to buy a new pump or heater if a simple, cost-effective repair will keep it running reliably.

However, if your equipment is outdated, severely rusted, or parts are no longer available, upgrading to modern, energy-efficient equipment might be the smarter long-term investment. We provide a free written quote after seeing your situation, laying out all your options clearly so you can make an informed decision.

Equipment Not Working Right?

Let our experts diagnose the problem and get your pool back in action.

Get A Free Estimate

Neighborhoods We Serve in Peoria

From the advanced automation systems common in Blackstone at Vistancia to the reliable older setups in Fletcher Heights, we have the experience to repair pool equipment across all of Peoria. We carry common parts on our trucks to fix issues promptly for our local neighbors.

Vistancia

Blackstone at Vistancia

Westwing Mountain

Trilogy at Vistancia

Sonoran Mountain Ranch

Tierra Del Rio

Pleasant Valley

Fletcher Heights

Silver Crest

Melton Ranch

Pool Equipment Repair FAQ

How quickly can you come out to fix my pool pump?

We understand that a broken pump can quickly lead to a green pool. We strive to diagnose and repair critical equipment failures as promptly as possible. Reach out to us, and we will get you on the schedule right away.

Do you repair both gas pool heaters and electric heat pumps?

Yes, our technicians are trained to troubleshoot and repair both traditional gas heaters and modern electric heat pumps from all major manufacturers.

Why is my pool pump making a loud screeching noise?

A loud screeching or grinding noise usually indicates that the internal motor bearings are failing, often due to a compromised shaft seal that allowed water into the motor. This requires professional repair or motor replacement.

Can you fix a leak at my equipment pad?

Absolutely. We can cut out cracked PVC pipes, replace faulty valves, and reseal threaded connections to ensure your equipment pad is completely water-tight.

How much does it cost to repair a pool heater?

Repair costs vary widely depending on whether it is a simple sensor issue or a major component failure like a heat exchanger. We provide a free written quote after diagnosing the specific problem with your unit.

Do you offer warranties on your repairs?

Yes, we stand behind our workmanship. We use high-quality parts that come with manufacturer warranties, and we ensure the repair is done correctly the first time to give you peace of mind.